1) 產品設計評審，輸出制造可行性分析報告。
Product design review, output manufacturing feasibility analysis report.
2) 工藝流程策劃，輸出工藝方框圖及工藝流程圖。
Process flow planning, output process block diagram and process flow diagram.
3) 過程失效模式分析，輸出過程失效模式分析表。
Process failure mode analysis, output process failure mode analysis table.
4) 按照項目計劃，負責開發裝配產線、設備及工裝，輸出相應技術要求，并完成驗收。
According to the project plan, responsible for developing assembly production lines, equipment and tooling, outputting corresponding technical requirements, and completing acceptance.
5) 按照項目計劃，參與測試設備及工裝的開發評審和驗收工作。
According to the project plan, participate in the development review and acceptance of test equipment and tooling.
6) 編寫作業指導書并培訓作業人員，輸出培訓記錄和評估表。
Compile operation instructions and train operators, and output training records and assessment forms.
7) 落實新產品樣機生產，對樣機不良進行分析并維修。
Implement prototype production, analyze and repair defective prototypes.
8) 新產品樣機過程問題收集、分析并改善，輸出樣機試制報告。
Collect, analyze and improve prototype process problems, and output prototype trial report.
9) 量產產品的質量問題分析與改善。
Analysis and improvement of quality Issues in mass-produced products.
10) 生產線問題的解決處理，工藝紀律的更新和人員培訓。
The resolution and handling of production line issues, the update of process discipline and personnel training
11) 工程變更的評估和實施執行，偏差的評估和驗證。
Assessment and implementation of engineering changes, assessment and verification of deviations.
12) 為了滿足公司的運營目標，負責提出、推進、實施工藝改進，優化制造工藝及降低成本。
To meet the company's operational goals, responsible for proposing, promoting and implementing process improvements, optimizing manufacturing processes and reducing costs.
13) 其他分配的職責。
Other duties as assigned.

任職要求

1）本科及以上學歷，機械、電子、電氣、工業工程等工程類專業

2）3年以上工作經驗，英語良好優先

3）熟悉 IATF16949、VDA6.3 過程審核流程；熟悉PFEMA、控制計劃和其他工藝文件的開發編制；熟悉相關電子裝配設備的工作原理和操作使用；

4）了解 QC 質量手法， 能夠分析解決產品的失效問題；了解 6 西格瑪和精益生產，熟悉汽車電子生產的關鍵工藝、裝備和質量管理手法。掌握SPC、MSA質量工具，可評估過程或設備能力；

5）CAD、SolidWorks、office、IPC-A-610

6）實肯干，以身作則，結果導向，客戶至上，能夠下沉到生產一線。